Back To Products

Diaphragm pumps - in polypropylene and aluminum

Submitted by Stefano on Wed, 07/12/2017 - 12:47
Waste oil | Fresh oil | Antifreeze | Windshield fluid | Water | Diesel fuel | DEF | Paint | Cleaning detergent

Diaphragm pumps - in polypropylene and aluminum

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed with an aluminium motor while the parts coming into contact with the fluid are in polypropylene. This is in order to offer a solution that can also be used in aggressive working environments with corrosive atmospheres, as well as for use with water-based solutions, detergents and corrosive fluids, while the pump continues to respect the ATEX directive. The vast range of diaphragms and valves that can be used ensure these products are fully modular and customised.



Diaphragm pumps - in polypropylene and aluminum
FAQ
Request Information
Video

s. 120-PPAB multiple inlet/oulet 1/2" - flow rate 15.8 gpm

s. 120-PPAB double inlet/multiple oulet 1/2" - flow rate 15.8 gpm

s. 1000-PPAB 1" - flow rate 44.9 gpm

s. 1000-PPAB double inlet 1" - flow rate 44.9 gpm

1/2" - 1:1 ratio - flow rate 15.8 gpm - s. 120-PB

1/2" - 1:1 ratio - flow rate 15.8 gpm - s. 120-PB double inlet



P/N
Product sheet
Documentation
Flow rategpm
Ratio
Max pressurepsi
Max cicles for minutecpm
Delivery for ciclesgallons
Max suction liftfeet (')
Max size pumpable solidsinches (")
Max working temperature°F
Noise leveldB
Max air consumptioncfm
Air working pressurepsi
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet and outlet
Membranes
Balls
Seats
PackingNo. - ft3
Gross weightlb
2BC/16117EA5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117HH5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117NH5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117SS5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve
Santoprene™
Santoprene™
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117TT5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
1 - 0.7
13
P/N
Product sheet
Documentation
Flow rategpm
Ratio
Max pressurepsi
Max cicles for minutecpm
Delivery for ciclesgallons
Max suction liftfeet (')
Max size pumpable solidsinches (")
Max working temperature°F
Noise leveldB
Max air consumptioncfm
Air working pressurepsi
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet and outlet
Membranes
Balls
Seats
PackingNo. - ft3
Gross weightlb
2BH/16117EA5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117HH5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117NH5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117SS5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve
Santoprene™
Santoprene™
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117TT5-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
1 - 0.7
13
P/N
Product sheet
Documentation
Flow rategpm
Ratio
Max pressurepsi
Max cicles for minutecpm
Delivery for ciclesgallons
Max suction liftfeet (')
Max size pumpable solidsinches (")
Max working temperature°F
Noise leveldB
Max air consumptioncfm
Air working pressurepsi
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet and outlet
Membranes
Balls
Seats
PackingNo. - ft3
Gross weightlb
2BD/26117EAI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
EPDM
acetal
AISI 316 stainless steel
1 - 1.1
15
2BD/26117HHI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
Hytrel®
Hytrel®
AISI 316 stainless steel
1 - 1.1
15
2BD/26117NHI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
NBR
Hytrel®
AISI 316 stainless steel
1 - 1.1
15
2BD/26117SSI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
Santoprene™
Santoprene™
AISI 316 stainless steel
1 - 1.1
15
2BD/26117TTI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
PTFE+Hytrel®
PTFE
AISI 316 stainless steel
1 - 1.1
15
P/N
Product sheet
Documentation
Flow rategpm
Ratio
Max pressurepsi
Max cicles for minutecpm
Delivery for ciclesgallons
Max suction liftfeet (')
Max size pumpable solidsinches (")
Max working temperature°F
Noise leveldB
Max air consumptioncfm
Air working pressurepsi
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet and outlet
Membranes
Balls
Seats
PackingNo. - ft3
Gross weightlb
2BG/26117EAI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
EPDM
acetal
AISI 316 stainless steel
1 - 1.1
27
2BG/26117HHI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
Hytrel®
Hytrel®
AISI 316 stainless steel
1 - 1.1
27
2BG/26117NHI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
NBR
Hytrel®
AISI 316 stainless steel
1 - 1.1
27
2BG/26117SSI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
Santoprene™
Santoprene™
AISI 316 stainless steel
1 - 1.1
27
2BG/26117TTI-55
44,9
1:1
120
300
0,16
dry column 16 - wet column 25
0,12
149
75
56,5
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (0.99") proneness to NPT 1.1/4" (f) thread
ball valve
PTFE+Hytrel®
PTFE
AISI 316 stainless steel
1 - 1.1
27
P/N
Product sheet
Documentation
Flow rategpm
Ratio
Max pressurepsi
Max cicles for minutecpm
Delivery for ciclesgallons
Max suction liftfeet (')
Max size pumpable solidsinches (")
Max working temperature°F
Noise leveldB
Max air consumptioncfm
Air working pressurepsi
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet and outlet
Membranes
Balls
Seats
PackingNo. - ft3
Gross weightlb
2BC/16117EA52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve with spring
EPDM
acetal
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117HH52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve with spring
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117NH52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve with spring
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117SS52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve with spring
Santoprene™
Santoprene™
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BC/16117TT52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
NPT 3/4" (f) (NPT 1" (f) for drum)
NPT 1/2" (f)
cylindrical ball valve with spring
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
1 - 0.7
13
P/N
Product sheet
Documentation
Flow rategpm
Ratio
Max pressurepsi
Max cicles for minutecpm
Delivery for ciclesgallons
Max suction liftfeet (')
Max size pumpable solidsinches (")
Max working temperature°F
Noise leveldB
Max air consumptioncfm
Air working pressurepsi
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet and outlet
Membranes
Balls
Seats
PackingNo. - ft3
Gross weightlb
2BH/16117EA52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve with spring
EPDM
acetal
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117HH52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve with spring
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117NH52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve with spring
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117SS52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve with spring
Santoprene™
Santoprene™
polypropylene and AISI 316 stainless steel
1 - 0.7
13
2BH/16117TT52-55
15,8
1:1
120
330
0,05
dry column 15 - wet column 25
0,06
149
75
17,7
29 ÷ 87
NPT 3/8" (f)
NPT 1/2" (f)
dual inlet NPT 3/4" (f)
NPT 1/2" (f)
cylindrical ball valve with spring
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
1 - 0.7
13

IDFamiglia = 48


     


	
 
   

  
The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed with an aluminium motor while the parts coming into contact with the fluid are in polypropylene. This is in order to offer a solution that can also be used in aggressive working environments with corrosive atmospheres, as well as for use with water-based solutions, detergents and corrosive fluids, while the pump continues to respect the ATEX directive. The vast range of diaphragms and valves that can be used ensure these products are fully modular and customised.


 
ENG
Descrizione Breve: 
The pneumatic diaphragm pumps with aluminium motor and polypropylene parts are recommended for the pumping of aggressive fluids; they are ATEX certified.
Foto(URL): 
Famiglie/PMAllumPolip.jpg
Settore Aeronautica: 
Settore Agricoltura: 
Macrofamiglia: 
Diaphragm pumps
Tipologia Fluido: 
Waste oil
Fresh oil
Antifreeze
Windshield fluid
Water
Diesel fuel
DEF
Paint
Cleaning detergent
Settore Automotive: 
Settore Veicoliindustriali: 
Settore Cleaning: 
Settore Edilizia: 
Settore TrasportiFerroviari: 
Settore IndustriaChimica: 
Settore IndustriaManifatturiera: 
Settore LubrificazioneCentralizzata: 
Settore Navale: 
Settore IndustriaMineraria: 
ID Famiglia: 
48
LinkVideo: 
/video?field_vidmacrofamiglia_value_i18n=Pompe+a+membrana
Gruppo FAQ: 
11
Posizione: 
250